cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco announces new innovations in SD-WAN, ISRs, SD-WAN Services, and Catalyst 9000 Series switches


223
Views
0
Helpful
4
Replies

HA Options on 2 x 2504's running 8.2.141 ?

Hi all,

 

Many questions have been asked about HA for 2504's but these were running old 7.x versions and some have also had secondary units with zero licences.

 

I have 2 x 2504's with 5 licences on each, and running 8.2.141.  Can I do the AP SSO HA Option or can I only do N+1 ?  It appears to me that the software will allow me to setup a controller as either a Primary or Secondary setup of Redundancy Management interface ip's 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Advisor

Re: HA Options on 2 x 2504's running 8.2.141 ?

Hi

 Still not supported. You see this on the release note of this version.

Search for SSO:

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82.html

 

-If I helped you somehow, please, rate it as useful.-

4 REPLIES
VIP Mentor

Re: HA Options on 2 x 2504's running 8.2.141 ?

2504 only support N+1

 

No SSO support

 

HTH

Rasika

*** Pls rate all useful responses ***

Highlighted
VIP Advisor

Re: HA Options on 2 x 2504's running 8.2.141 ?

Hi

 Still not supported. You see this on the release note of this version.

Search for SSO:

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82.html

 

-If I helped you somehow, please, rate it as useful.-

Hall of Fame Master

Re: HA Options on 2 x 2504's running 8.2.141 ?

Like the others mentioned it’s not supported and will never be. The replacement 3504 supports SSO. 

-Scott
*** Please rate helpful posts ***
Hall of Fame Guru

Re: HA Options on 2 x 2504's running 8.2.141 ?

2504, which Cisco has announced End-of-Sale (18 April 2018), only supports N+1.  The replacement, 3504, support HA SSO.  

CreatePlease to create content
Ask the Expert- Introduction to Network Design