have one cisco wireless controller CISCO2106 . i have configured mangement interface and AP-manager interface into that. I can now login to WLC through management interface, But the problem is AP-manager interface is not coming UP so the AP are not assoc

[sumeet kumar]

[sumeet kumar]

Hi,

My skype account is sumeet.kumar19 . Please help me, i checked that there is no duplicate IP in the network.

Regards

Sumeet

[Surendra BG]

Hi,

Upgrade is the action plan.. please try to upgrade the code and see if thst helps..

Regards

Surendra

[sumeet kumar]

Hi,

Could you please help me Upgrading the code as i donot know how to do it.

Regards

Sumeet

[Surendra BG]

Do you have the code? 4.2.209?? if so.. please follow the below link.. this will give you step by step procedure in getting the upgrade done!!

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml#gui

Lemme know if this answered ur question!!

Regards

Surendra

[sumeet kumar]

Hi, thanks for sending the link, But i donot have code 4

.2.209, can i download this with giest account.

[Surendra BG]

try to download the image see if that helps..

Regards

Surendra

[sumeet kumar]

Could you please come on gtlak for few min if possible ?

[sumeet kumar]

No i donot have permission to download imge or

code file

[sumeet kumar]

Hi, Now i have reset the AP and we can login to AP

also. in sh cdp nei its showing on switch.

on WLC message i am getting this error message

error"unable to delet ARP entry for -87.25.27.127 from oprerating system.ioctl operation failed"

suggest some thing

[Surendra BG · Accepted solution]

are the APs getting the IP address?? what does debug on the WLC say??

[sumeet kumar]

Yes, Ap are taking IP address Now and i a

m attaching debug message..

[dmantill · Accepted solution]

As per debug

Ap sends discovert and WLC transmit discovery response....

But what happend then? we need all the debug output from at least 1 AP.

@Surendra: can you setup a webex session with him to help him over this on your schedule? unfortunately it seems like we are not even able to find each other during my day....

[sumeet kumar]

Hi,

I am ready on any time you prefert, i can use team viewer to give you access, as i am not strong in wlc CONFIG.. pls help me it appresiated..

its now very urgent for me..your 10 min might help me @ my future

i am ready for any knind for help..

regards

sumeet

[dmantill · Accepted solution]

i can help you right now

[sumeet kumar]

Hi, Sorry i read your message now, at what time you will availa

ble again