How does an Anchor WLC be marking the client for deletion once a client is disassociated / deauthenticated on Foreign WLC?
Do we have a flow of how an Anchor WLC will be marking the client for deletion once the client is de-authenticated/ disassociated from the Foreign WLC?
Under ideal scenario it is assumed that the foreign WLC will be ‘Sending Handoff Close’ for the mac entry to the Anchor WLC and accordingly its marked for deletion on Anchor WLC as well instantaneously.
How about the clients that have not been gracefully de-authenticated or when it moves away?
Anchor and Foreign WLC evaluates their configured ‘Client user idle timeout’ independently before marking the client for deletion or will there be a sync between Anchor-Foreign once the entry is deleted from Foreign after expiry of ‘Client user idle timeout’?
IntroductionFeatured ExpertQ: Does switch port support uplink the mac-sec link?Q: Will the older 16.10/16.12 IOS XE SD-WAN (stand-alone) images be maintained for a specific amount of time going forward? Will these stand-alone code branches receive mainten...
This is a two-step process.
Step 1: Need to add the FlexConnect AP to a FlexConnect Group.Step 2: Need to configure a FlexConnect ACL (to specify the local traffic-of-interest), and map it to that FlexConnect Group.
For step 1----------As in the i...
Hello , We faced issues with Cisco AnyConnect when trying to connect at home network. we have 2 scenarioScenario 1: one home network and Cisco AnyConnect gives "limited or no connectivity" error messageScenario 2: multiple networks and Cisco An...
Hello, We're running WLC 9800-40 with version 16.12.2t with SFP-10G-LR-S. I have some questions regarding SFP-10G-LR-S:1. Is this model supported by Cisco? If not Which model do you recommend for WLC9800-40?2. Would SFP-10G-LR-S cause issues with upg...
Hello, I just received my new 240ac access point!I tried to configure it twice now but each time I set the IP to be static I can wait more than an hour and it is still flashing 3 colors. Last time I lost my patience and after 30min I reset...