How to check how mang users can access Wireless network concurrently with one credential?

[DuJin0509]

Dear everyone,

I want to check how many WIFI users can access Wireless network concurremtly utilize one credential ?

I can not use GUI , so please kindly share the CLI command to approach.

Thank you very much.

[Rasika Nayanajith · Accepted solution]

Is this WLC managed AP ? If so you can try below

(WLC) >show client username <user_name>

HTH

Rasika

*** Pls rate all useful responses ***

[DuJin0509]

Hello Rasika,

I means I want to know if it is possible to verify how many users could utilize one credential concurrently even if no user real access the network, just use the cli to verify the max login value, like CIsco easyvpn we could define how many user could login the same time with one credential. 

Because a customer complain his IPAD and IPHONE can not authenticate successful, so I suspect the max login number count is 1.(his laptop has login with his credential already) 

[mohanak]

> show netuser summary

Maximum logins allowed for a given username ........Unlimited

This example shows how to display detailed information on the specifies network user:

> show netuser detail john10

username........................................... abc

WLAN Id............................................. Any

Lifetime............................................ Permanent

Description......................................... test user

[mohanak]

Refer link : http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-3/command/reference/cr73/b_cr_7-3_chapter_010.html#wp3607711688

[hajia]

Hi DuJin,

Have you tried

"

Max Concurrent Logins for a user name¹

"

WLC -- Security -- AAA --- User Login Policies

If you set it to 0, means no limition.

https://supportforums.cisco.com/discussion/11588876/wlc-5508-cannot-have-similar-user-logged-twice