cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1164
Views
10
Helpful
4
Replies

How to configure a 5GHz only network on the WS-C3850-24P wireless controller?

henriquejrjp
Level 1
Level 1

Hi,

I would like to configure a 5GHz ONLY network on the WS-C3850-24P wireless controller. Is there any way to do this?

Thanks,

Henrique Jr.

1 Accepted Solution

Accepted Solutions

Hi Henrique,

 

You can easily limit SSID to 5GHz as shown below

ASW2(config-wlan)#radio ?
all Configures the WLAN on all Radio bands
dot11a Configures the WLAN on 802.11a only
dot11ag Configures the WLAN on 802.11a and 802.11g only
dot11bg Configures the WLAN on 802.11b/g only (802.11b only, if 802.11g is
disabled)
dot11g Configures the WLAN on 802.11g only

 

ASW2(config-wlan)#radio dot11a

 

HTH

Rasika
*** Pls rate all useful responses ***

 

View solution in original post

4 Replies 4

Thanks for your help!!!

Hi Henrique,

 

You can easily limit SSID to 5GHz as shown below

ASW2(config-wlan)#radio ?
all Configures the WLAN on all Radio bands
dot11a Configures the WLAN on 802.11a only
dot11ag Configures the WLAN on 802.11a and 802.11g only
dot11bg Configures the WLAN on 802.11b/g only (802.11b only, if 802.11g is
disabled)
dot11g Configures the WLAN on 802.11g only

 

ASW2(config-wlan)#radio dot11a

 

HTH

Rasika
*** Pls rate all useful responses ***

 

Thank you, @Rasika Nayanajith !!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: