cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
226
Views
0
Helpful
2
Replies
Highlighted
Beginner

HTTPS issue on Aironet 2702i in autonomous mode

Hi there,

 

Since a couple of months (no real need the first I've seen this issue), I've noticed I could not connect to my Aironet 2702i in HTTPS.

It either shows on Chrome the NET::ERR_CERT_AUTHORITY_INVALID error in a loop mode (I can't continue to the website as I always did, it just comes back to the same state) or displays that I can't get access to the webpage on IE or Edge.

 

As a workarround I re-activated http and I could manage to update it to version ap3g2-k9w7-xx.153-3.JJ1 but this didn't solve anything. It is probably due to an outdated cypher or protocol.

 

Does anybody has a solution for that ? An even better option for me would be to be able to import a certificate from my own internal CA, but I already know there is no option in web GUI.

 

In advance, many thanks for your help ! :-)

2 REPLIES 2
VIP Engager

Re: HTTPS issue on Aironet 2702i in autonomous mode

Don't use the webinterface :)
Never used it (before ME) and can't really help.

You can use to create a new certificate (make sure the clock is correct on the AP!!! use NTP):
crypto key generate rsa general-keys
Then reload the AP and I think it should use the new certificate (which is still invalid in the browser, as it's self-signed).
VIP Mentor

Re: HTTPS issue on Aironet 2702i in autonomous mode

please also try

1. with other Browser (IE /FIrefox).

2. Reset Chrome/ Update to the newest version

 

 

 

Regards

Dont forget to rate helpful posts

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards