I just set up a mobility express network in my home consisting of three 1815w APs.
Network works great, all laptops, macs, TVs, xbox, etc are seeing 400mb/s as expected...
The newer (X & Xr) iPhones in the home refuse to connect. They are running iOS 12, and say "unable to join network" or "wrong password" when trying to join. Sometimes they will join for a few seconds and then kick off. iPhone 7 has no problems connecting whatsoever.
Using WPA2 security.
I read somewhere about fast SSID switching being an issue, however I can't see that option in the ME GUI.
After adding a WLC to ISE if you get the following error (See message below) after running debug aaa tacacs enable in the WLC. Incorrectly formatted authorization message Here's what you need to do to fix it. Login to ISE Work centers, Settings, Device ad...
Community Live- Understanding How Multicast Works with Cisco Wireless LAN Controllers
(Live event - formerly known as Webcast- Tuesday November 19, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event will have place on Tuesday 19th, Novembe...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
New Version for the Wireless Lan Config Analyzer: v.4.4.14
Supports AireOS up to 8.8, any model.
Error parsing AP list with location with spaces
For tool information: