06-03-2019 08:38 PM - edited 07-05-2021 10:30 AM
Hi I prepare AP to get it joined to WLC. but I noticed i can change ip address, default gateway etc but i cannot change the AP name unless it join WLC. Can we change AP name offline? Thank you
06-03-2019 11:37 PM
Hi @wfqk
No, Its not possible to change the AP hostname via WLC, when its not joined to the controller.
For offline APs you can change the hostname through its console using the command capwap ap hostname <AP Name>
Or Once its joined to controller you can use the commands config ap name <new AP name> <Previous Name or Ethernet MAC address>.
06-04-2019 06:59 PM
Thanks for your reply.
Actually what i mean is if we can change its name by console using command capwap ap hostname <AP Name>
but i tried it many times, this command cannot work.
06-04-2019 08:36 PM
Hope you are running this command on Enable mode.
Sample output:
login as: admin
admin@xx.yy.xz.yz's password:
AP01>en
Password:
AP01#capwap ap hostname TESTAP
Please note that if AP is already associated to WLC,
the new hostname will only reflect on WLC after AP
dis-associates and rejoins.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide