09-15-2020 06:29 AM - edited 07-05-2021 12:30 PM
Hello,
I wonder how can I get list of end of life access points (2021) that are currently registered with my WLC 5508. Please advise.
Thank you.
Regards,
Daniel
Solved! Go to Solution.
09-15-2020 05:04 PM
Every terminal client (putty, SecureCRT, etc.) have an option to log terminal output into a text file.
Use the following CLI command to generate the list:
config paging disable sh ap summary
09-15-2020 06:40 AM
That will depend on the firmware of the controller.
09-15-2020 06:42 AM
The current software version is:
Software Version 8.3.112.0
Thanks
09-15-2020 06:51 AM - edited 09-15-2020 06:53 AM
09-15-2020 06:53 AM
You can do with Prime, but never tried from WLC.
WLC you can list the model and check against Model - is this works or you looking some script to generate you looking ?
09-15-2020 07:15 AM
- If you take into account the ap-only , you can also use :
https://cway.cisco.com/sncheck/
M.
09-15-2020 07:27 AM
From what I could see The Check Device Coverage does not provide information about end of life.
You can only see end of sale and end of support. Thanks.
09-15-2020 07:37 AM
End of Support and End of Life are the same.
09-15-2020 08:16 AM
- Exactly ,
M.
09-15-2020 08:28 AM
Is there an option to export all APs list from WLC? Thank you
09-15-2020 05:04 PM
Every terminal client (putty, SecureCRT, etc.) have an option to log terminal output into a text file.
Use the following CLI command to generate the list:
config paging disable sh ap summary
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: