LLDP Config on 3802AP

[kshong]

Hello Everybody,

I have a question about LLDP with 3802AP

I found 3802AP supports CDP and LLDP.

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/wave2-ap/feature-matrix/b-wave2-ap-feature-matrix/aireos-controllers.html

However, I could not find any configuration about lldp.

I tired to type the config such as lldp run, show lldp, config lldp etc..

but, there is only cdp config.

Does disabling a cdp mean enabling a lldp in AP?

Thank you.

[Haydn Andrews]

from memory if CDP is enabled on the AP then so is LLDP

You would need to enable LLDP on the switch though

[Leo Laohoo · Accepted solution]

---

@Haydn Andrews wrote:

You would need to enable LLDP on the switch though

---

Depends on the switch and depends on the firmware. 

Classic IOS have no issues with CDP and LLDP enabled.  

IOS-XE running 3.X.X have no issues with CDP and LLDP enabled. 

Starting from 16.X.X (and later), TAC does not recommend enabling CDP and LLDP together in a switch.