cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1340
Views
0
Helpful
3
Replies

Maximum Lobby Admin users on WiSM

Hello,

One of our customers is asking us about what's the maximum number of Lobby Admin users that could be created on a WiSM? They are a University that could need about 60 Lobby Admin users for their different faculties and administrative areas along the campus.

Thanks.

1 Accepted Solution

Accepted Solutions

Serge Yasmine
Cisco Employee
Cisco Employee

Hi,

The maximum amount of guest accounts that can be created for the local user
database is limited to a maximum of 2048 entries, default count is 512. This
database is shared by local management users (including lobby ambassadors),
net users (including guest users), MAC filter entries, and disabled clients.
Together, as long as all of these types of users do not exceed the
configured database size of 2048 you are ok.

and

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a49cd7.shtml#backinfo

Thanks

Serge

View solution in original post

3 Replies 3

Serge Yasmine
Cisco Employee
Cisco Employee

Hi,

The maximum amount of guest accounts that can be created for the local user
database is limited to a maximum of 2048 entries, default count is 512. This
database is shared by local management users (including lobby ambassadors),
net users (including guest users), MAC filter entries, and disabled clients.
Together, as long as all of these types of users do not exceed the
configured database size of 2048 you are ok.

and

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a49cd7.shtml#backinfo

Thanks

Serge

At the same time of posted this question, I have opened a case on the "PDI Helpdesk" and honestly your answer is much more accurate and specific than that provided the PDI team.

Now I would like to know if is it possible to increase the quantity of guest users more than 2048 adding more componnents, like an authentication server?

Thanks a lot.

Yes u can use radius for guest users and admins.

It is on the config guide of wlc.

Let me know if you dont manage to find it. I ll send u the link dont have it in hand now.

Thank you,

Serge

sent from mobile

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: