ME setup for virtualization running on the host with bridge adapter
I have parallels desktop virtualization 14.0 on macOS 10.14.
I have a setup with the bridged adapter.
When I am connected to Mobility Express AIR 1830i (220.127.116.11), any running VM do NOT get an IP address.
When I am connected to other vendor AP I will get IP address for each VM. And everything work fine.
Is there any configurable option to get possibility to run multiple MAC adressess with multiple DHCP requests and as a result get multiple IP addresses on one host? AKA support running multiple VM in bridged mode on one host under Mobility Express?
Hi, My customer wants to Download a report of users with MAC addresses who logged in June 2020. He is using PRTG but that Server is not connected with WLC. What we need to do to achieve this goal? Thanks in advance. Regards,Waqas
[ The link to the discussion will be published on November 10th ]
This event is an opportunity to discuss the LTE market trends from a consumer perspective, highlighting the 4G LTE service from Cisco Enterprise BU. Furthermore, we will discuss the strateg...
Hi All,We have 9100 AP trying to join on 9800 WLC. When AP try to join controller it gives below error Sending Join request to 172.16.31.66 through port 5254Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Join(5)Discarding msg CAPWAP...
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 18.104.22.168, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect ra...