cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1534
Views
0
Helpful
2
Replies

Medium Power vs Full Power on 1852

B A
Level 1
Level 1

Hello.

I have this issue. I connected many AIR-AP1852I-E-K9 and AIR-AP1852E-E-K9 (they need 20.9W) to different switches that provide 15.4W so I saw "PoE/Medium Power (15.4 W)" on WLC. To provide what my APs need I used a power injector but even after that the WLC says "PoE/Medium Power (15.4 W)".
I tried three power injectors... Cisco, TP-Link and Maxi-Link. Still no joy.

Any idea what is going on?

2 Replies 2

jagan.chowdam
Level 4
Level 4

If you know for sure that switch or POE Injectors can provide 802.3at power, then probably it might be a bug.

 

Can you share the output of the following commands

 

On AP

show controllers dot11Radio 0

 

On WLC

show ap config 802.11b <AP Name>

 

Regards,

CJ

Switches cannot provide 802.3at power so we use 802.3at power injectors that should be capable of it.

WLC: A command shows 15.4W.

I checked logs on the AP and it says: CDP POE negotiation failed.

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: