cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
148
Views
5
Helpful
5
Replies
Highlighted
Beginner

Mobility Express - schedule SSID broadcast

Is it possible to schedule availability of WLAN for certain hours of the day? Do you only disable SSID broadcast or entirely disable WLAN itself?

 

I am running version 8.5.140.0

 
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Mentor

Re: Mobility Express - schedule SSID broadcast

Hi,

Try upgrdae to 8.8.111.0 version then you will not need Cisoc Prime because in new version you will have a option of scheduling.

 

Check the screenshot:Schedule error.png

 

 

Info: with 8.5.140 -- You need to use ACL or Cisoc prime to enable/disable it.

 

Regards

Dont forget to rate helpful posts

5 REPLIES 5
VIP Advisor

Re: Mobility Express - schedule SSID broadcast

Hi

 First off, SSID schedule requires Cisco Prime, as far as I can tell.  If  you have a Cisco Prime and if Mobility Express is integrated with it, then, I´d say it is possible. Otherwise, I´d say not.

 

 

-If I helped you somehow, please, rate it as useful.-

Hall of Fame Guru

Re: Mobility Express - schedule SSID broadcast

The solution can be dependent on one's skill.
Easiest solution is what Flavio has recommended about using PI to schedule the down/up of an SSID.
Option 2 is to use time-based ACL to configure when the VLAN interface (where the dynamic interface is pointing to) is scheduled for down/up.
Another option is to script when a terminal can log into the WLC and disable the WLAN.
Finally, another time-based ACL and use EnergyWise to power down the AP.
Enthusiast

Re: Mobility Express - schedule SSID broadcast

Totally agree with the two solutions above.
For the Prime option look at this: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/213414-schedule-ssid-availability-on-cisco-wlcs.html

 

For the time based ACL look at this https://www.pei.com/2016/02/time-of-day-access-for-guest-ssid-on-a-cisco-wlc/

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
VIP Mentor

Re: Mobility Express - schedule SSID broadcast

Hi,

Try upgrdae to 8.8.111.0 version then you will not need Cisoc Prime because in new version you will have a option of scheduling.

 

Check the screenshot:Schedule error.png

 

 

Info: with 8.5.140 -- You need to use ACL or Cisoc prime to enable/disable it.

 

Regards

Dont forget to rate helpful posts

Beginner

Re: Mobility Express - schedule SSID broadcast

Nice! Great ideas guys. I'm going to try upgrading the version as suggested.

 

Thanks!

CreatePlease to create content
Spotlight awards-March 2019