cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
242
Views
20
Helpful
8
Replies
Highlighted
Beginner

Move Multiple AP to A new set of controller all at once.

I have about a 100 2700s AP connected to a pair of controller in HA and out of that 100 I would like to move about 50 AP to another pair of Controller altogether, Can this be achieved with the help of Cisco Prime Templates tab, if so how, or any other method. Please point me in the right direction.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Mentor

Hi,

addition to Leo's...

 

If you have a Cisco Prime in use, you can do that automatically through that one. You can create a new AP configuration profile, where you only configure this setting and then push it out to all APs.

 

Regards

Dontf forget to rate helpful posts

View solution in original post

8 REPLIES 8
Highlighted
Hall of Fame Community Legend

Why not just set DHCP Option 43?

Highlighted

Hi @Leo Laohoo using Option 43 will get all of the 100 access points to a new controller pair as all those AP are on same switch stack, I only want a selected few AP (about 50 ) to a join the new controller pair.

Highlighted
Hall of Fame Community Legend

Are they all the same model?

Highlighted

Yes, all of them are same model.

Highlighted
VIP Mentor

Hi,

addition to Leo's...

 

If you have a Cisco Prime in use, you can do that automatically through that one. You can create a new AP configuration profile, where you only configure this setting and then push it out to all APs.

 

Regards

Dontf forget to rate helpful posts

View solution in original post

Highlighted

Do you mean by creating a new template on Cisco Prime and manually selecting the AP and then moving them to a new set of controller by pointing them to their Management IP ?

Highlighted

yes.

Highlighted

Ahh! That Worked Seamlessly. Thank you and I appreciate for pointing me in the right direction.

Content for Community-Ad