cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
549
Views
0
Helpful
1
Replies

MSE 3310 -no tracking

janesh_abey
Level 1
Level 1

Hi all,

We got a 3310MSE that does not track clients.,rogues etc for some reason.

Basically,

- there are no firewalls between PNCS and MSE

- clocks are synced up with NTP

- CAS is running on the MSE

- I have added controllers and a test site with clients and is synced up with the MSE.

- Have enabled tracking under tracking doe clients and rogues excluding adhoc rogue APs -we only have 100 element license.

The only other thing worth mentioning is that MSE is running  version 6 firmware and the controllers are 7.0.220 but I do not think this should prevent  MSE from tracking devices.

Any help/advice is much appreciated.

cheers,

Jansh
-------------
Services
-------------

Service Name: Context Aware Service
Service Version: 6.0.75.0
Admin Status: Enabled
Operation Status: Up

Service Name: Wireless Intrusion Protection Service
Service Version: 1.0.1106.0
Admin Status: Disabled
Operation Status: Down

--------------
Server Monitor
--------------

Fri Oct 19 12:11:47 <timezone> 2012
Server current time: Fri Oct 19 12:37:30  <timezone> 2012
Server timezone:

Server timezone offset: 36000000
Restarts: 6
Used Memory (bytes): 51067376
Allocated Memory (bytes): 111869952
Max Memory (bytes): 954466304
DB virtual memory (kbytes): 619
DB virtual memory limit (bytes): 0
DB disk memory (bytes): 4128768
DB free size (kbytes): 2480

---------------
Active Sessions
---------------

Session ID: 3697
Session User ID: 1
Session IP Address: 172.27.1.1

Session start time: Fri Oct 19 12:12:23 <timezone> 2012
Session last access time: Fri Oct 19 12:34:56 <timezone>2012

-------------
Context Aware Service
-------------

Total Active Elements(Clients, Rogues, Interferers): 0
Active Clients: 0
Active Tags: 0
Active Rogues: 0
Active Interferers: 0
Active Wired Clients: 0
Active Elements(Clients, Rogues, Interferers) Limit: 1000
Active Tag Limit: 100
Active Wired Clients Limit: 0
Active Sessions: 1
Clients Not Tracked due to the limiting: 0
Tags Not Tracked due to the limiting: 0
Rogues Not Tracked due to the limiting: 0
Interferers Not Tracked due to the limiting: 0
Wired Clients Not Tracked due to the limiting: 0
Total Elements(Clients, Rogues, Interferers) Not Tracked due to the limiting: 0

-------------
Context Aware Sub Services
-------------

Sub Service Name: aeroscout
Version: 3.2.0 - 4.0.14.13
Description: AeroScout® Location Engine for RSSI and TDOA asset tracking
Registered: true
Active: true
Watchdog Process ID: 8861
Engine Process ID: 9045

1 Reply 1

BRYN JONES
Level 1
Level 1

We have been informed by our support partner that MSE should be running the same code level as the controllers, perhaps this is your issue.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: