cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
312
Views
0
Helpful
4
Replies
Highlighted
Beginner

multiple MSEs

Hello,

Due to high number of APs, I need to deploy a separate MSE   to provide  location services and  aWIPS. :-(

In this scanrio,  is it possible to share the  same floor map  which contain local and WSSI APs  between the 2 MSEs?

the tracking elements  per mse are given below.

awips: rogue clients, rogue aps, adhoc rogues, interferes

location services: wlan clients,rogue aps,interfers,rfid tags

Thanks in advance.

cheers,

janesh

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Master

Well from WCS/NCS/PI, you can only assign one MSE to a given floor.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Master

Well from WCS/NCS/PI, you can only assign one MSE to a given floor.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

Highlighted

Thanks Scott for the clarification.

Highlighted

No problem

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Highlighted
Cisco Employee

Hello Janesh,

As per your query you want to deploy a separate MSE to provide location services and a WIPS.

No. it is not possible to share the same floor map which contain local and WSSI APs between the 2 MSEs.

Content for Community-Ad