Multiple VLAN's, one SSID

[ERIC BARNETT]

I'm getting to the point where my campus wireless network is growing past the subnet size that I'm comfortable dealing with.  I have a WiSM and WCS and am running the newest IOS on each.  Is there any way to use multiple VLAN's on one campus-wide SSID?

Or, can I put the same SSID on the two controllers and map it to two separate VLAN's without causing roaming issues?

Thanks,

Eric

[Surendra BG · Accepted solution]

Hi Eric,

Yes we can do this and this feature is called AP Grouping on WLC... Here is the configuration example to do the same..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Regards

Surendra

[Leo Laohoo]

Hey Surendra,

How about "Interface Groups"?

[Surendra BG]

ha ha Only few ppl are running the MR image as of now!!

Regards

Surendra

[Leo Laohoo]

Good feature, though! 

[ERIC BARNETT]

Thanks!  That did it.  I wish there was a way to just pool controller-wide instead of per AP, but that fixed my problem and allowed me to do some other neat things as a result.

--Eric

[Surendra BG]

Thats nice to hear!! Thanks for posting on CSC!!

have a great day

Regards

Surendra