network mesh MAP

[Dhikra Marghli]

Hello

my work that i have 4 acces point 1815 and we would to work in mesh mode 

so my question .

if they not support mode mesh so it client wirless can  connect with them withou problem ??

how does the traffic work between acces point  MAP ???

how long distance betwenn AP MAP ??

thanks 

[Sandeep Choudhary]

As per my knowledge 1800 series dont support mode. May be in future it will but not at the moment.

Regards

dont forget to rate helpful posts

[Dhikra Marghli]

NO !my  question on suppose we work with 1815 so i have three question !!

if they not support mode mesh so it client wirless can  connect with them withou problem ??

how does the traffic work between acces point  MAP ???

how long distance betwenn AP MAP ??

[Sandeep Choudhary · Accepted solution]

Hi,

1. As i said earlier, 1800 series AP dont support mesh mode means it will not work as MAP.

2. In a Cisco wireless backhaul network, traffic can be bridged between MAPs and RAPs. This traffic can be from wired devices that are being bridged by the wireless mesh or CAPWAP traffic from the mesh access points. This traffic is always AES encrypted when it crosses a wireless mesh link such as a wireless backhaul.

3. More info about distance, check this guide:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/b_mesh_88/b_mesh_88_chapter_01.html#ID494

Regards

Dont forget to rate helpful posts

[Dhikra Marghli]

i have three acces point MAP newtork wirless with them and not bridge with them !!

So   witch acces point MAP that client wirless connected with !!  last MAP or first MAP !!

and witch mode acces point MAP !!??

thanks in adavnce 

i need reference please 

[Dhikra Marghli]

i have three acces point MAP WIRLESS  not MAP bridge

so my question

when client move from AP to AP map , witch acces point  MAP first to connect !!

witch mode AP  to be nework mesh  wirless AP to wirless AP and not acces point MAP bridge to bridge 

thanks 

[Sandeep Choudhary · Accepted solution]

Please read this guide:

https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/8-3/b_mesh_83/Mesh_Deployment_Modes.html

Here are the list of Indooe and outdoor Mesh APs:

Cisco Indoor Mesh Access Points

Cisco Aironet 1600 Series Access Points
Cisco Aironet 1700 Series Access Points
Cisco Aironet 2600 Series Access Points
Cisco Aironet 2700 Series Access Points
Cisco Aironet 3500 Series Access Points
Cisco Aironet 3600 Series Access Points
Cisco Aironet 3700 Series Access Points
Cisco Aironet 1530 Series Access Points
Cisco Aironet 1540 Series Access Points
Cisco Aironet 1550 Series Access Points
Cisco Aironet 1560 Series Access Points
Cisco Aironet 1570 Series Access Points
Cisco Industrial Wireless 3700 Series Access Points

Cisco outdoor mesh access points comprise of the Cisco Aironet 1500 series access points. The 1500 series includes 1572 11ac outdoor access points, 1552 and 1532 11n outdoor mesh access points, and the newer 1540 and 1560 11ac wave 2 series..

Regards

Dont forget to rate helpful posts

[Dhikra Marghli]

you don't unterstand ly question 

Toplogy : Point-to-Point Wireless MAP : betwwenn AP MAP is wireless conection and  not  Point-to-Point Wireless MAP  bridge 

===>  witch mode that i configured in acces point MAP to be nework mesh !!??  

so , when client move from MAP to MAP , my question what is  access point  MAP that client connect first !!

[Sandeep Choudhary · Accepted solution]

MAP is configured as bridge mode.

Client will decide the best coverage AP to connect.

Regards
Don't forget to rate helpful posts

[Dhikra Marghli]

Hello

Topology mesh 

the three  ap map are moved to a mountain place and a single ap RAP  in an adminstration !!

so  that is we make toplogy mesh acces point

we are more  person connected in mountain place 

So  , if we have ap  model 1500 in moutain  place SO  , client can connectet with   connection wirless through  model AP  1500  !!?,

[Dhikra Marghli]

Hello

Topology mesh 

the three  ap map are moved to a mountain place and a single ap RAP  in an adminstration !!

so  that is we make toplogy mesh acces point

we are more  person connected in mountain place 

So  , if we have ap  model 1500 in moutain  place SO  , client can connectet with   connection wirless through  model AP  1500  !!?,

[Sandeep Choudhary]

yes client will connect to MAP.