I have cisco 1562e with this type of antena: 2x AIR-ANT2568VG-N
This AP will be powered by C9200L-24P-4G-E
I will use cat6 cables.
If I understand correctly, this AP with antennas require 25w, so C9200 provide PoE+, so it should be enough, am I right ?
What should be distance from SW to AP, is it okay to have 100m?
Solved! Go to Solution.
Hi. Thanks for answers,
Please confirm, that 9200 PoE+ ports are enough for cisco 1562E with external antennas, and there is no need any another poe adapter.
I have one more question regarding output VDC from cisco 9200, I cannot find what is the value. But I found that for PoE+ there is range from 44-57 VDC, am I right ?
The power supply modules are autoranging units that support input voltages between 100 and 240 VAC. The output voltage range is 12 to 12.5 V for 125W power supply and 54 to 56 V for 600W and 1000W power supplies.
Dont forget to rate helpful posts