cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

467
Views
20
Helpful
8
Replies
Beginner

PoE+ Distance

Hi All, 

 

I have cisco 1562e with this type of antena: 2x AIR-ANT2568VG-N

This AP will be powered by C9200L-24P-4G-E

I will use cat6 cables.

 

If I understand correctly, this AP with antennas require 25w, so C9200 provide PoE+, so it should be enough, am I right ?

What should be distance from SW to AP, is it okay to have 100m?

 

Thank you

3 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Advisor

Re: PoE+ Distance

Yes correct if you using Cat 6, that should work for you, I will minimize the distance as much as we can.

 

I have tested someplace nearly up to 90meter with Avaya's phone that works.

 

 

BB
*** Rate All Helpful Responses ***

View solution in original post

VIP Mentor

Re: PoE+ Distance

Hi,

 

The limitation is not the power; it's the Ethernet cabling standards that limit the total length of cabling to 100 meters.

 

100 Meters will be ok .

 

Regards

Dontf orget to arte helpful posts

View solution in original post

Highlighted
VIP Mentor

Re: PoE+ Distance

correct.

 

As its witten in cisco document.

View solution in original post

8 REPLIES 8
VIP Advisor

Re: PoE+ Distance

Yes correct if you using Cat 6, that should work for you, I will minimize the distance as much as we can.

 

I have tested someplace nearly up to 90meter with Avaya's phone that works.

 

 

BB
*** Rate All Helpful Responses ***

View solution in original post

VIP Mentor

Re: PoE+ Distance

Hi,

 

The limitation is not the power; it's the Ethernet cabling standards that limit the total length of cabling to 100 meters.

 

100 Meters will be ok .

 

Regards

Dontf orget to arte helpful posts

View solution in original post

Beginner

Re: PoE+ Distance

Hi. Thanks for answers,

 

Please confirm, that 9200 PoE+ ports are enough for cisco 1562E with external antennas, and there is no need any another poe adapter.

 

Thank you

VIP Mentor

Re: PoE+ Distance

Yes it will.

1562E need max of 25Watt and 9200 PoE+ can provide that.

 

Regards

Dont forget to rate helpful posts

Beginner

Re: PoE+ Distance

Hi,

 

I have one more question regarding output VDC from cisco 9200, I cannot find what is the value. But I found that for PoE+ there is range from 44-57 VDC, am I right ?

 

Thank you

VIP Mentor

Re: PoE+ Distance

Hi,

 

The power supply modules are autoranging units that support input voltages between 100 and 240 VAC. The output voltage range is 12 to 12.5 V for 125W power supply and 54 to 56 V for 600W and 1000W power supplies.

 

Check Table4:

 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/hardware/install/b-c9200-hig/b-c9200l-hig_chapter_01.html#id_75465

 

Regards

Dont forget to rate helpful posts

Beginner

Re: PoE+ Distance

Hi, 

 

so for this SW with default PWR 600W, I will have output on port from 54 to 56 VDC, am I right ?

 

C9200L-24P-4G

PWR-C5-600WAC

370W

740W

Highlighted
VIP Mentor

Re: PoE+ Distance

correct.

 

As its witten in cisco document.

View solution in original post

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards