Power Injector for 1830

[AlekseyAndrosov]

Hi,

I am putting together a BOM for a customer.

They require 1830 APs with Power Injectors.

I failed to find any power injectors on cisco.com

Doesn't Cisco manufacture any ? If no, is there a recommended brand ?

Thanks in advance !

[mohanak]

Powering options

●  802.3af/802.3at ●  Enhanced PoE ●  Cisco local power supply, AIR-PWR-C= ●  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports 802.3af only) Note: If 802.3af PoE is the source of power, the USB port is disabled.

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1830-series-access-points/datasheet-c78-735582.html

[AlekseyAndrosov]

"Note: This injector supports 802.3af only"

We want to use all features of 1830, hence 802.3at

[Leo Laohoo · Accepted solution]

Doesn't Cisco manufacture any ? If no, is there a recommended brand ?

AIR-PWRINJ4 will support 1830.  Power draw is for the 1830 is 16.0w and AIR-PWRINJ4 can support up to 20.0w. 

Cisco doesn't manufacture the injectors.  The manufacturer of the Cisco-branded power injectors is Phihong USA.

[AlekseyAndrosov]

Thanks for the info.

http://www.broadbandbuyer.co.uk/products/18401-cisco-air-pwrinj4=/specifications/

Here it says 15W, not 20W. Will you please share, where did you look for the specs of AIR-PWRINJ4 ?

Thanks

[Leo Laohoo]

AIR-PWRINJ4 is capable of completely powering up the 1250, 2700 & 3700 and these models require higher than 15.4w PoE.