03-11-2019 03:48 AM - edited 07-05-2021 10:02 AM
Hello ,
i have a problem that acces point 1 as a client wilress : have role mobile, desctop ...
So why ap has this role ???????, how i can allow as a point access normal !!
thanks
Solved! Go to Solution.
03-11-2019 03:53 AM
the problem that access point is getting internet connection as a wiresles client ?????,,
so how i can resolve this problem !!
thanks in advance
03-11-2019 03:53 AM
03-11-2019 03:56 AM
03-11-2019 04:00 AM
and the same configuraton as others AP
i don't understant why only this AP get internet !! not as other AP !!
please , how i can resolve this problem !!
03-11-2019 04:18 AM
i compared all AP with this AP1 but AP1 is always get internet as a mobile , desctop ..
so what i can do that allow AP as other AP :( fortigate 200 D is show in interface this sitauation )
i need a help urgent
03-11-2019 04:58 AM
1. reboot the AP
2. Check the AP is in local mode or not
and last check if AP is in correct AP group!
Regards
Dont forget to rate helpful post
03-11-2019 05:51 AM
Hello,
Please, check some configs in your AP.
1.Check if they are at the same group.
2. Check if your aps is online your controller.
3. Check if the correct vlan is allowed in your ap.
03-11-2019 03:53 AM
the problem that access point is getting internet connection as a wiresles client ?????,,
so how i can resolve this problem !!
thanks in advance
03-11-2019 05:51 AM
Hello,
Please, check some configs in your AP.
1.Check if they are at the same group.
2. Check if your aps is online your controller.
3. Check if the correct vlan is allowed in your ap.
03-11-2019 03:53 AM
did you configure AP as workgroup bridge ?
03-11-2019 03:56 AM
03-11-2019 04:00 AM
and the same configuraton as others AP
i don't understant why only this AP get internet !! not as other AP !!
please , how i can resolve this problem !!
03-11-2019 04:18 AM
i compared all AP with this AP1 but AP1 is always get internet as a mobile , desctop ..
so what i can do that allow AP as other AP :( fortigate 200 D is show in interface this sitauation )
i need a help urgent
03-11-2019 04:58 AM
1. reboot the AP
2. Check the AP is in local mode or not
and last check if AP is in correct AP group!
Regards
Dont forget to rate helpful post
03-11-2019 09:43 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide