03-19-2019 02:30 AM - edited 07-05-2021 10:04 AM
Hello
i have AP 1815i convertir to cisco moblity express with 8.8.100
and i have 3 other AP with 8.3.111
so controller moblity express don't see AP in ther interface web
so message errer show in access point is : Controller rejected image download.Check if TFTP server configured on ME WLC or maximum concurrent download limit has reached
////////////////////////////////////////////////////////////////////////////////////////////////////////////
AP28AC.9E89.3FD0#show ip interface brief
Interface IP-Address Method Status Protocol Speed
wired0 192.168.0.22 DHCP up up 100
wifi0 unassigned unset administatively down down n/a
wifi1 unassigned unset administatively down down n/a
srcr6 unassigned unset up up n/a
////////////////////////////////////////////////////////////////////////////////////////////////
(Cisco Controller) >show ap join stats summary all
Number of APs.............................................. 2
Base Mac AP EthernetMac AP Name IP Address Status
28:ac:9e:e3:2b:80 28:ac:9e:e3:2b:80 AP28AC.9E89.3FD0 192.168.0.22 Not Joined
28:ac:9e:e3:35:80 28:ac:9e:89:42:50 AP28AC.9E89.4250 192.168.0.21 Joined
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.8.100.0
OUI File Last Update Time........................ N/A
System Name...................................... Sotetel
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.2489
IP Address....................................... 192.168.0.30
Last Reset....................................... 1: reload command
System Up Time................................... 0 days 0 hrs 23 mins 58 secs
System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... TN - Tunisia
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
--More-- or (q)uit
Number of WLANs.................................. 1
Number of Active Clients......................... 0
OUI Classification Failure Count................. 0
Memory Current Usage............................. 30
Memory Average Usage............................. 30
CPU Current Usage................................ 0
CPU Average Usage................................ 0
Flash Type....................................... Compact Flash Card
Flash Size....................................... 1073741824
Burned-in MAC Address............................ 28:AC:9E:89:42:40
Maximum number of APs supported.................. 50
System Nas-Id....................................
WLC MIC Certificate Types........................ SHA1/SHA2
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
so what i can do so that controller see access point ????, what solution can i doing !
Solved! Go to Solution.
03-19-2019 02:32 AM
make sure all your AP are having the same software version.
Regards
Dont forget to rate helpful posts
03-19-2019 02:43 AM
yes update all other to same version as controller /ME AP.
Regards
Dont forget to rate helpful posts
03-19-2019 03:07 AM
You must upgrade to an 8.5.x release and then upgrade to Release 8.8.x.
Regards
Dont forget to rate helpful posts
03-19-2019 02:32 AM
make sure all your AP are having the same software version.
Regards
Dont forget to rate helpful posts
03-19-2019 02:37 AM
i have only one controller moblity express 8.8.100 and other AP ( capwap ) with 8.3.111
so how i can allow all ap capwap joind to controller !!
i upgrade to 8.8.100 or what version !!
03-19-2019 02:43 AM
yes update all other to same version as controller /ME AP.
Regards
Dont forget to rate helpful posts
03-19-2019 02:56 AM
i update ap to 8.8.100 with this
commande : archive download-sw /reload tftp://192.168.0.50/AIR-AP1815-K9-ME-8-8-100-0.tar but
when : show version :
ROM: Bootstrap program is U-Boot boot loader
BOOTLDR: U-Boot boot loader Version 30
AP28AC.9E89.3FD0 uptime is 0 days, 0 hours, 11 minutes
Last reload time : Tue Mar 19 10:37:50 UTC 2019
Last reload reason : reload command
cisco AIR-AP1815I-I-K9 ARMv7 Processor rev 5 (v7l) with 1015956/843144K bytes of memory.
Processor board ID FGL2209B3RF
AP Running Image : 8.3.111.0
Primary Boot Image : 8.3.111.0
Backup Boot Image : 8.3.111.0
1 Gigabit Ethernet interfaces
2 802.11 Radios
Radio FW version : 8edf74e05d634a962e683454e8fc1be2
NSS FW version : not available
Base ethernet MAC Address : 28:AC:9E:89:3F:D0
Part Number : 0-0000-00
PCA Assembly Number : 074-105850-02
PCA Revision Number : 0
PCB Serial Number : FOC22063AJR
Top Assembly Part Number : 074-105850-02
Top Assembly Serial Number : FGL2209B3RF
Top Revision Number : A0
Product/Model Number : AIR-AP1815I-I-K9
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
03-19-2019 02:57 AM
ontroller rejected image download.Check if TFTP server configured on ME WLC or maximum concurrent download limit has reached
[*03/19/2019 10:52:20.5599] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10)
same cas
please what solution that i can doing that allow ap joind to controller !!!!
03-19-2019 03:07 AM
You must upgrade to an 8.5.x release and then upgrade to Release 8.8.x.
Regards
Dont forget to rate helpful posts
03-19-2019 02:34 AM
manually update the 3 other APs to the same code version
03-19-2019 02:53 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide