cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2881
Views
10
Helpful
9
Replies

PSK SSID - Unable to connect

lazuardinurfaiz
Level 1
Level 1

I am using Cisco Wireless Controller 3504 running 8.10.112.0. I use this WLC for two site, both of them running flexconnect mode. On 1 site, I have a SSID using PSK as security. Recently, some endpoint (android smartphone) cannot connect to that SSID.

Can you help me to solve this issue?

Thank you.

Best regards,

1 Accepted Solution

Accepted Solutions

Finally a solution to see the light at the end of the tunnel:

https://community.cisco.com/t5/wireless-and-mobility/issues-connecting-android-10-to-cisco-me/m-p/4096960#M116570

 

HTH
-Jesus
*** Please Rate Helpful Responses ***

View solution in original post

9 Replies 9

Sandeep Choudhary
VIP Alumni
VIP Alumni

can you paste the output of these command:

 

sh wlan <id>

 

debug clinet <mac address>

 

Regards

Dont forget to rate helpful posts

Hi Sandeep.

I attached the output of show_wlan_id. I try to debug_client with the affected mac address, but no log is shown.

Best regards,

Lazuardi Nurfaiz

configuration looks all right. Please try the solution mentioned by Jesus Pavon and let us know.

 

Regards

Dont forget to rate helpful posts

There is another workaround to disable SHA1 and only use WPA2-SHA256 with FT disabled.

Can you share the device models affected by the issue? It all appears to be an issue related to latest Qualcomm chipsets' firmware with Cisco's IE att 44.

HTH
-Jesus
*** Please Rate Helpful Responses ***

So far the affected by this issue is Android Smartphone using Android firmware version 10.

Finally a solution to see the light at the end of the tunnel:

https://community.cisco.com/t5/wireless-and-mobility/issues-connecting-android-10-to-cisco-me/m-p/4096960#M116570

 

HTH
-Jesus
*** Please Rate Helpful Responses ***

Thank you! After enabling FT on WLAN, all android 10 are able to connect.

JPavonM
VIP
VIP

Are those unable-to-connect devices using Android 10?
If so, please check this thread:

https://community.cisco.com/t5/wireless-and-mobility/issues-connecting-android-10-to-cisco-me/td-p/4009289

 

HTH
-Jesus
*** Please Rate Helpful Responses ***

 

Hi Jesus.

Yes, exactly. All of the affected devices use Android 10. Thank you for the link. I will try to use solution in that link.

Best regards,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card