cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
162
Views
0
Helpful
4
Replies
Beginner

Query on Autonomous AP Wireless bridge

I have a query on Autonomous AP Wireless bridge. Can we have point to multipoint setup ? i.e., one root bridge and multiple non-root bridge associating to that root bridge ?

4 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Advisor

Re: Query on Autonomous AP Wireless bridge

 

The guides are pretty old but autonomous is autonomous.  Just search for Cisco Autonomous Bridge multiple vlans and you should find a bunch of examples.

https://supportforums.cisco.com/document/61936/autonomous-ap-and-bridge-basic-configuration-template

http://mrncciew.com/2013/01/13/autonoumous-ap-wireless-bridges/

BB
*** Rate All Helpful Responses ***
Rising star

Re: Query on Autonomous AP Wireless bridge

Short answer is yes you can do point to point to multi-point with autonomous bridges.

Documentation on Autonomous mode APs is becoming very hard to find.

 

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/atnms-ap-82/configuration/guide/cg-82-book/cg-chap1-overview.html

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1530/installation/guide/1530hig/1530_ch1.html#pgfId-1071535

 

Just keep in mind this when planning it:

The throughput is reduced depending on the number of non-root bridges that associate with the root bridge. With a link data rate at 54 Mbps, the maximum throughput is about 25 Mbps in a point-to-point link. The addition of three bridges to form a point-to-multipoint network reduces the throughput to about 12.5 Mbps

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
VIP Mentor

Re: Query on Autonomous AP Wireless bridge

Yes you can do it.

 

https://rscciew.wordpress.com/2014/10/26/autonomous-ap-as-wireless-bridge-with-multiple-vlan/

 

Regards

Dont forget to rate helpful posts

Highlighted
VIP Mentor

Re: Query on Autonomous AP Wireless bridge

Yes you can do it.

 

https://rscciew.wordpress.com/2014/10/26/autonomous-ap-as-wireless-bridge-with-multiple-vlan/

 

Regards

Dont forget to rate helpful posts

Everyone's tags (1)
4 REPLIES 4
VIP Advisor

Re: Query on Autonomous AP Wireless bridge

 

The guides are pretty old but autonomous is autonomous.  Just search for Cisco Autonomous Bridge multiple vlans and you should find a bunch of examples.

https://supportforums.cisco.com/document/61936/autonomous-ap-and-bridge-basic-configuration-template

http://mrncciew.com/2013/01/13/autonoumous-ap-wireless-bridges/

BB
*** Rate All Helpful Responses ***
Rising star

Re: Query on Autonomous AP Wireless bridge

Short answer is yes you can do point to point to multi-point with autonomous bridges.

Documentation on Autonomous mode APs is becoming very hard to find.

 

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/atnms-ap-82/configuration/guide/cg-82-book/cg-chap1-overview.html

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1530/installation/guide/1530hig/1530_ch1.html#pgfId-1071535

 

Just keep in mind this when planning it:

The throughput is reduced depending on the number of non-root bridges that associate with the root bridge. With a link data rate at 54 Mbps, the maximum throughput is about 25 Mbps in a point-to-point link. The addition of three bridges to form a point-to-multipoint network reduces the throughput to about 12.5 Mbps

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
VIP Mentor

Re: Query on Autonomous AP Wireless bridge

Yes you can do it.

 

https://rscciew.wordpress.com/2014/10/26/autonomous-ap-as-wireless-bridge-with-multiple-vlan/

 

Regards

Dont forget to rate helpful posts

Highlighted
VIP Mentor

Re: Query on Autonomous AP Wireless bridge

Yes you can do it.

 

https://rscciew.wordpress.com/2014/10/26/autonomous-ap-as-wireless-bridge-with-multiple-vlan/

 

Regards

Dont forget to rate helpful posts

Everyone's tags (1)
CreatePlease to create content