cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2894
Views
5
Helpful
15
Replies
Highlighted
Beginner

Recovery image. Topology 3602i thru 2504 controller from TFTP Server

Hi everyone! Here is my topology and I need to perform image recovery for my 3602.

3602 can be connected and powered only by 2504 controller.

How I need to configure controller to allow communication from 3602 and TFTP server???

Does all ports on controller L3 and I need to make Routing thru 2921 Router?

Or no needs to configure  IP ports interfaces on controller and it will work on L2.

Please give me direction to follow and recover IMAGE.

15 REPLIES 15
Highlighted

Read console and resolve the problem. 

also load image on AP could be done without renaming ap3g2-rcvk9w8-tar.152-4.ja1.tar file

I tried and it worked on my 3602.

set IP_ADDR 10.0.0.1
set NETMASK 255.0.0.0
set DEFAULT_ROUTER 10.0.0.3
tftp_init
ether_init
flash_init
tar -xtract tftp://10.0.0.3/ap3g2-rcvk9w8-tar.152-4.ja1.tar flash:

Thanks guys for helping me!

I think it will be good example for others. (Always check tftp server time out value to 30 sec and some times you need to reboot machine XP for interfaces take affect)

Thank you Leo!

Thank you Manannalage!

I think case is closed.

 

Content for Community-Ad