07-29-2013 02:56 PM - edited 07-04-2021 12:32 AM
Hello
how to reset to factory default the WLC 5500, admin password is not working too
thanks
Vishal
07-29-2013 03:19 PM
Hello Vishael
If you can use GUI for admin password, you can console to WLC 5508. When WLC is booting press scape key and try with recovery password
07-29-2013 03:20 PM
You can use this link
http://www.cisco.com/en/US/products/ps6308/products_password_recovery09186a008071faa7.shtml
07-29-2013 06:22 PM
Once controller boot up & prompted for username type "recover-config". That will do what you want.
https://supportforums.cisco.com/docs/DOC-1639
HTH
Rasika
07-30-2013 03:03 PM
Hello,
As per your query i can suggest you the following link-
http://www.cisco.com/en/US/products/ps6308/products_password_recovery09186a008071faa7.shtml
Hope this will help you.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: