cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
178
Views
0
Helpful
1
Replies
Highlighted

Roaming between AP group and Flex-connect group

We have single WLC at site and 2 access point

1st AP connected in local mode and mapped to AP group 1

2nd AP connected to same WLC in flex-connected mode and mapped to Flex-connect group 1(This AP is connected in warehouse area) Both AP in same physical environment.

 

Now my question is, if client roam using same WLAN/SSID(same VLAN and No IP re-assignment) will it be make without break roaming or break before make roaming. We want seamless roaming without re association.

We want to deploy this solution over for multiple AP.

 

1 REPLY 1
Highlighted
VIP Rising star

Re: Roaming between AP group and Flex-connect group

>>> seamless without re association <<<
-> this is not possible, roaming means associate to another AP (not controller)

possibly you mean without re-authentication ?
-> yes this is where a controller based wireless environment is designed for

that the AP's belong to different AP-groups is of no importance, seen from the controller it is the same WLAN/SSID 
if the client has a session to the controller, the client can roam to another AP seamlessly
of course there are some conditions to be met, like the coverage area's of the AP's need to overlap

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey