I'm doing a staging with Cisco WLC which I run HA and ISE. I have made a cluster. Two running Admin and Monitoring role and the other two for policy. When I want to run the Wi-Fi Setup beta to configure the Guest Sponsored. The wizard keep loading after I have selected Sponsored. What could be the problem.
Configuring Radio Interface
ssid SSID-NAME – Assigning SSID in interface
encryption mode ciphers aes-ccm – Set the encryption
encryption vlan 1 mode ciphers aes-ccm – Configure the encryption for vlan
Configuring Radio sub inte...
To configure IP Address in AP
config ap static-ip enable AP-NAME IP-ADDRESS MASK GATEWAY
To configure AP Credentials for Telnet/SSH
config ap telnet enable AP-NAME
config ap ssh enable AP-NAME
config ap mgmtuser add username USERNAME password PASSWORD en...
We are unable to see the radios APs available... we connect direct to to the POE 110SG-24 ptos switch but its star blinking as it is running and suddenly blinking form red-blue-green-off .. .as we read it means it doesnt have enough power... b...
I want to reserve IPs which are got from dhcp server. My dhcp server is configured in cisco WLC-2504.
I can reserve IPs by mac binding in cisco 3850 switch. What is the procedure for WLC-2504. (
I've already issued "config network ip-mac-bindi...