SNMP Traps for Secondary WLC - HA

[CiscoWiFiGuy]

Dear Experts,

We are Using Cisco PI 3.5 and having IOS 8.5.135.0 on our WLAN Controllers.

Controllers are in HA and what we are looking to have snmp traps on cisco prime from Secondary controller as well. Lets suppose if we remove power from Secondary ( Hot standby ) WLC , is there any way that we can get its snmp trap on Cisco prime.

Appreciate if you can please help us with this or with any other workaround kindda solution.

Cheers.

Thanks,

Waqas

[marce1000]

 - Seems not possible , this thread elaborates on the problem :

                     https://community.cisco.com/t5/wireless-and-mobility/snmp-trap-on-secondary-wlc-5508/td-p/2296157

 M.

[satdubey]

You can monitor following details of redundant WLC after WLC 8.7 code and above.

Article :- https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-7/High_Availability_DG.html

• show redundancy peer-system statistics – peer statistics
• redundancy detail
• redundancy summary
• redundancy statistics