cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
66
Views
0
Helpful
2
Replies
Highlighted
Beginner

Staging Cisco 3802i Aps (5000)!

Hello,

I got 5000 of 3802i Aps, I would like to stage them with static ip add and WLC ip add also.

is there is any tools can help me to make my work faster with out console each one and push the configuration on it??

Thanks,

Everyone's tags (1)
2 REPLIES 2
Rising star

Re: Staging Cisco 3802i Aps (5000)!

 

 - Use DHCP for address assignment if at all possible.

M.

Enthusiast

Re: Staging Cisco 3802i Aps (5000)!

DHCP for the IP side of things. This can also be used for assigning the WLC via option 43.

If your looking to configure static primary/ secondary controllers, set the AP name, AP mode then you could use APIC-EM to stage the APs using the PNP process.

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_wireless_plug_and_play_deployment_guide.html

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
CreatePlease to create content
Spotlight awards-March 2019