cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
937
Views
0
Helpful
3
Replies

Time limitation for H-REAP standalone mode

lnoriega64
Level 1
Level 1

Hi,

We have a customer who is evaluating a Cisco Vs. Motorla wirless solution. He says that a Motorola AP can only work in standalone mode for 48 hrs. after it lost communication to the controller. Is there any limitation like this with a 2500 controller and 1140 series access points solution?.

Is there any reference to show?

Regards

Luis Noriega

2 Accepted Solutions

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame

Not that I know of...but here is a link to the limitation of h-reap/FlexConnect:

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1241304

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1229985

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

View solution in original post

We have different SSIDs, security, etc at various sites. We have recently started providing tech staff with preconfigured FlexConnect APs that they use for testing while staging and imaging machines for different locations. It doesn't matter if these APs are connected to the WLC or not. They function for days on end.

In some instances we have sent these out pre deployment for various testing purposes. Seems to work.

View solution in original post

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame

Not that I know of...but here is a link to the limitation of h-reap/FlexConnect:

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1241304

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1229985

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Thank you Scott.

If any time limitation exists, it should be in that document.

We have different SSIDs, security, etc at various sites. We have recently started providing tech staff with preconfigured FlexConnect APs that they use for testing while staging and imaging machines for different locations. It doesn't matter if these APs are connected to the WLC or not. They function for days on end.

In some instances we have sent these out pre deployment for various testing purposes. Seems to work.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: