cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1022
Views
5
Helpful
4
Replies

Upload Upgrade File to CMX

Maurice Ball
Level 3
Level 3

Could someone please provide me with the procedure on how to upload the upgrade file to the CMX virtual appliance drive?

1 Accepted Solution

Accepted Solutions

Thanks for the information, but Cisco advises you to upgrade the versions 10.6.x from the cli and not with the gui.

I have figured out how to upload the file. The reason I was unable to do is. I was using the protocol SFTP and not SCP. As soon as I switched to the SCP protocol. I was able to upload the file without any issue.

View solution in original post

4 Replies 4

Scott Fella
Hall of Fame
Hall of Fame
Take a look at the release notes for the code you want to upgrade to. The procedure is documented there. Here is a link to one that will give you a place to start.

https://www.cisco.com/c/en/us/td/docs/wireless/mse/10-6/installation/installation_guide_106/installing_a_cisco_mse_virtual_appliance.html#id_96064
-Scott
*** Please rate helpful posts ***

if you already got CMX installed, then you can go to upgrade page by simply following URL. You should see a page like below

https://<cmx-addr>:1984/

CMX-Upgrade.JPG

HTH

Rasika

*** Pls rate all useful responses ***

Thanks for the information, but Cisco advises you to upgrade the versions 10.6.x from the cli and not with the gui.

I have figured out how to upload the file. The reason I was unable to do is. I was using the protocol SFTP and not SCP. As soon as I switched to the SCP protocol. I was able to upload the file without any issue.

Glad you got the file uploaded.
-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: