Using Dynamic Interface for RADIUS and WCS

[steven.vandyk]

Hello

I have a simple wireless setup:

WLC 2500 with 20 APs.

Mgmt vlan 1 - 10.100.0.X

Client vlan 20 - 10.20.0.X

Production vlan 10 - 10.0.0.X

Problem: WCS and RADIUS server are in VLAN 10.

Even with MGMT via wireless and MGMT via dynamic interfaces options enabled, the WLC refuses to communicate with the WCS and RADIUS.

Any way to solve this?

[Stephen Rodriguez]

That should work, provided that you used the dynamic interface when you joined the AAA and WCS and not the management interface.

That being said, this does go against the best practices for WLC deployments.  IMHO, I would remove the 'production' interface and put my wireless clients on another VLAN.

HTH,

Steve