cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
158
Views
0
Helpful
2
Replies
Highlighted
Beginner

WCS + 2 x WLC 4402 x 25 AP = ?

Is it possible to use WCS + 2 WLC 4402 with 25 APs license to control 50 APs?

Thanx!

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Community Legend

Re: WCS + 2 x WLC 4402 x 25 AP = ?

Hi Mikhail,

Yes, this config is perfectly acceptable and will support 50 AP's :) It will not support any futre growth as far as adding additional AP's (without adding a new WLC)You also might want a third WLC to be used in an N+1 Topology in case of a WLC failure.

But other than that you should be good to go.

Hope this helps!

Rob

View solution in original post

2 REPLIES 2
Highlighted
Hall of Fame Community Legend

Re: WCS + 2 x WLC 4402 x 25 AP = ?

Hi Mikhail,

Yes, this config is perfectly acceptable and will support 50 AP's :) It will not support any futre growth as far as adding additional AP's (without adding a new WLC)You also might want a third WLC to be used in an N+1 Topology in case of a WLC failure.

But other than that you should be good to go.

Hope this helps!

Rob

View solution in original post

Beginner

Re: WCS + 2 x WLC 4402 x 25 AP = ?

Thank you :) WiFi is not critical for us, we just need some more APs and fortunately have second 4402 :)

CreatePlease to create content
Content for Community-Ad