06-28-2008 10:02 AM - edited 07-03-2021 04:05 PM
Is it possible to use WCS + 2 WLC 4402 with 25 APs license to control 50 APs?
Thanx!
Solved! Go to Solution.
06-28-2008 11:10 AM
Hi Mikhail,
Yes, this config is perfectly acceptable and will support 50 AP's :) It will not support any futre growth as far as adding additional AP's (without adding a new WLC)You also might want a third WLC to be used in an N+1 Topology in case of a WLC failure.
But other than that you should be good to go.
Hope this helps!
Rob
06-28-2008 11:10 AM
Hi Mikhail,
Yes, this config is perfectly acceptable and will support 50 AP's :) It will not support any futre growth as far as adding additional AP's (without adding a new WLC)You also might want a third WLC to be used in an N+1 Topology in case of a WLC failure.
But other than that you should be good to go.
Hope this helps!
Rob
06-28-2008 11:13 AM
Thank you :) WiFi is not critical for us, we just need some more APs and fortunately have second 4402 :)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: