01-24-2012 01:33 AM - edited 07-03-2021 09:26 PM
Hello,
I Would like connect few Aps Cisco 1242 on WCS with snmpv3 in the same security WLCs. I have a probleme to add manually AP1242 on this WCS
For AP Cisco 1242 snmp v3 don't existe by browser web then ,I added follow line in CLI command :
Cisco1242(config)#:snmp-server user snmpuser remote v3 encrypted auth sha **************** priv des56 ********************
***** = password
For WCS, I used Add Autonomous Acces Points:
Please, what do think ? I suppose it is something which miss.
Thank you for your help.
Laurent.
01-24-2012 05:38 AM
You have telnet enabled on the ap? That is all I can think that might be the issue.
01-26-2012 05:16 AM
Hi Scott,
I checked, the telnet is enabled on AP.
I dont't have problem to connect AP in SNMPV2 but I would like to connect this AP in SNMP V3 for security.
Thank.
Laurent
01-26-2012 08:09 AM
Well if you have v3 setup on the AP and that is working correctly, I don't know why it's not working then on WCS. I have not tried v3.
Thanks,
Scott Fella
Sent from my iPhone
02-06-2012 08:47 AM
Hi Scott,
I found my problem: missing engine ID to validate the connection.
It work now.....
Thank you.
Laurent
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: