04-28-2015 02:25 PM - edited 07-05-2021 03:05 AM
I see that both get used frequently. My WLC does not seem to support the top one:
config network ap-mcast-mode multicast 239.239.239.239
config network multicast mode multicast 239.239.239.239
Thanks
04-28-2015 04:56 PM
Yes, first one may be a old command in previous WLC code versions. No longer supported in newer codes.
You only require 2nd command to configure a multicast group for WLC to use for CAPWAP multicast for APs.
HTH
Rasika
*** Pls rate all useful responses ***
05-14-2015 08:03 AM
I agree with the Manannalage and yes the first one is the old command in previous WLC code versions. so it will not work on the newer wireless controllers. you will need to use the 2nd command.
Please go through the below below link for more info about the multicast configuration and its CLI commands.
www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81671-multicast-wlc-lap.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01011.html#task_03422F526369449EBDE486B7030589B7
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide