cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
736
Views
5
Helpful
2
Replies

Whether 40Mhz Bandwidth is supported on 2504 controller

yasaswi55
Level 1
Level 1

I found 20Mhz bandwidth enable option in 2504 controller.But what about 40 Mhz .The access points(1142) are dual band...I hope it should support in 2504 controller also.If there is no option of 40Mhz ,Please Correct me

2 Replies 2

Saravanan Lakshmanan
Cisco Employee
Cisco Employee

On all N APs it is supported only on 5Ghz(A-Radio) & not in 2.4Ghz(G-Radio). This feature is platform independent.

Amjad Abdullah
VIP Alumni
VIP Alumni

Just like what Sarvanan said, 40 MHz is only available on 802.11a (5GHz) and not on 802.11b/g (2.4GHz).

However, in old versions of code (6.0.182 or something like that) for wirleless controller I remember the 40 MHz was also available for 2.4 GHz (802.11b/g). They recognized later it is not feasible to add it to 2.4 GHz so they removed it from later releases.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: