Wireless LAN Controller 5508 - Web Auth, change unsuccessful logon attempts
While using the Web Auth, a user is allowed to try logging in a maximum of three times. Once they reach the third attempt, the wireless connection stops and disconnects. Is there a way to change the unsuccessful logon attempts from three to another amount? I am trying to find it but can't find it anywhere.
Re: Wireless LAN Controller 5508 - Web Auth, change unsuccessful
You can't change that value of 3, you can either disable client exclusion or reduce the time before the clients gets removed from the exclusion list. This would be loacted under the WLAN > SSID > Advanced tab.
Help out other by using the rating system and marking answered questions as "Answered"
Question:I have two Cisco 5520 WLC running HA 22.214.171.124 code. Clients (not all) from different places are having difficulties to surf internet on Guest WiFi. Different devices like surface pro, laptops and even phones (both android and phones) is having t...
I have:Product/Model Number : AIR-SAP1602I-E-K9withCisco IOS Software, C1600 Software (AP1G2-K9W7-M), Version 15.3(3)JC, RELEASE SOFTWARE (fc1)I need to have internet access via eth in a deep place of my basement. So I bought a small thing called wifi ext...
I have a few AIR-CAP3502E-A-K9 access points that I want to change to Lightweight mode. I did a lot of researching and found that I needed the ap3g1-k9w7-tar.153-3.JAB.tar file or a similar version of it.I do have that file and I was able to upload ...
WLAN Poller provides functionality to:
Bulk data/debug collection from Controllers and APs. Execute the commands on regular intervals.
DFS statistics and debug collection
IOS AP Flash health check and memory
AP cert check with generating reports
My report tells you a simple viewpoint to understand the evolution of the wireless LAN from 1997 to the 2020s. You can also get basic knowledge on an uplink of Wi-Fi6, the latest IEEE 802.11ax standard. Data analysis results based on our experimental s...