cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
129
Views
5
Helpful
2
Replies
Highlighted
Beginner

wlc 2504 AIR-CAP1532I-E-K9 continiusly downloading

Hi,

I would like to upgrade WLC 2504 from 8.2.151.0 to newe image. So I follow release note:

 

If you are using Release 8.2.15x or earlier, we recommend that you upgrade to Release 8.2.16x or 8.3.x and then upgrade to Release 8.5.140.0.

 

 

so I upgrade to 8.3.121.0

 

all device upgrade except  AIR-CAP1532I-E-K9, it is continuously downloading (Operational Status)

 

 

WLC 2504

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.3.121.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 20.0

 

I also try to upgrade to 8.5.x but again only AIR-CAP1532I-E-K9, it is continuously downloading...

 

How can I get it out from downloading? What can I do? 

 

p.s. it is outside AP so I don't want to climb to it :-D

 

Best regards,

Ivan

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Mentor

Re: wlc 2504 AIR-CAP1532I-E-K9 continiusly downloading

Did you upload a supplementry image on 2504 WLC? This bundle is mandatory to support AP802,AP1530, AP1550 and AP1570

 

AIR-CT2500-AP_BUNDLE-K9-8-3-150-0.aes

https://software.cisco.com/download/home/283848165/type/280926587/release/8.3.150.0

 

1. disconnect AP from Switch

2. update wlc with supplementry image

3. then cconnect AP again to chekc if its getting connecte dor not!

 

Also recommand to use either 8.3.150.0 or 8.5.151.0 software for 2504 WLC.

 

Regards

Dont forget to rate helpful posts

2 REPLIES 2
VIP Mentor

Re: wlc 2504 AIR-CAP1532I-E-K9 continiusly downloading

Did you upload a supplementry image on 2504 WLC? This bundle is mandatory to support AP802,AP1530, AP1550 and AP1570

 

AIR-CT2500-AP_BUNDLE-K9-8-3-150-0.aes

https://software.cisco.com/download/home/283848165/type/280926587/release/8.3.150.0

 

1. disconnect AP from Switch

2. update wlc with supplementry image

3. then cconnect AP again to chekc if its getting connecte dor not!

 

Also recommand to use either 8.3.150.0 or 8.5.151.0 software for 2504 WLC.

 

Regards

Dont forget to rate helpful posts

Beginner

Re: wlc 2504 AIR-CAP1532I-E-K9 continiusly downloading

thanks for fast response, I somehow manage to miss that :-)

Best regards,

Ivan

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards