cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
114
Views
0
Helpful
2
Replies
Highlighted
Beginner

WLC 2504 Configuration Mismatch between confile file and GUI

Hi All,

 

The config file in my controller shows this two commands:

config network broadcast enable
config network multicast global enable

 

Running 'show network summary' gives me this:

Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable

 

Also, in my GUI Broadcast Forwarding and Global Multicast Mode are disabled.

 

Why the mismatch?

 

Thanks

 

 

 

Thanks

2 REPLIES 2
Highlighted

Hello Luis,

 

Please refer the below links which can help you on the configuration .

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0MR1/configuration/guide/wlc_cg70MR1/cg_controller_setting.html

Highlighted

Hello Luis,

 

Please refer the below links which can help you on the configuration .

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0MR1/configuration/guide/wlc_cg70MR1/cg_controller_setting.html