02-25-2011 08:30 AM - edited 07-03-2021 07:52 PM
Hi all,
I manage a WLC 4404 ( with 4.2.176.51M IoS) and I've only got 2 models of access points in the solution:
For indoor - AIR-LAP1242AG-E-K9
For outdoor - LAP1510
My question is if I can integrate any LAP iwith this WLC (mesh), like:
AIR-LAP1131G-E-K9
AIR-LAP1231G-E-K9
AIR-LAP1252G-E-K9
AIR-LAP521G-E
I know that this question seem to be basic but in the WLC documentation I can´t find it...
Thx in advance,
mserrao
Solved! Go to Solution.
02-25-2011 09:35 AM
Hi,
Here is the Release Notes for 4.2.176.51M , this will let us know what all APs are supported..
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn4217651M.html#wp1004483
•Cisco Aironet 1500 (1505 and 1510) series outdoor mesh access points
•Cisco Aironet 1000, 1100, 1130, 1200, 1240, 1250, and 1310 indoor access points
Release 4.2.176.35M does not support Cisco 1520 (1522, 1524) series mesh access points.
Lemme know if this answered your question..
Regards
Surendra
02-25-2011 09:35 AM
Hi,
Here is the Release Notes for 4.2.176.51M , this will let us know what all APs are supported..
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn4217651M.html#wp1004483
•Cisco Aironet 1500 (1505 and 1510) series outdoor mesh access points
•Cisco Aironet 1000, 1100, 1130, 1200, 1240, 1250, and 1310 indoor access points
Release 4.2.176.35M does not support Cisco 1520 (1522, 1524) series mesh access points.
Lemme know if this answered your question..
Regards
Surendra
03-16-2011 10:51 AM
Thx for your correct answer.
Regards
mserrao
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: