WLC 5508 HA redundancy management IP addresses

[davinci]

Is it possible to use same IP addresses for redundancy management IP address pair and the regular management IP address pair on WLCs?

[Rasika Nayanajith · Accepted solution]

Management & Redundancy-management should be on same subnet. Each unit need to have unique redundancy-management IP address & management IP address is shared between units.

Something like below

(WLC) >show interface summary
management LAG 1000 x.x.0.200
redundancy-management LAG 1000 x.x.0.201
redundancy-port - untagged 169.254.0.201

(WLC-Standby) >show interface summary
management LAG 1000 x.x.0.200
redundancy-management LAG 1000 x.x.0.202
redundancy-port - untagged 169.254.0.202

HTH

Rasika

*** Pls rate all useful responses ***

[davinci]

awesome, thanks for the help.