cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
265
Views
0
Helpful
3
Replies
Beginner

WLC 9800 AP not broadcasting SSID

Hello,

 

I have assigned tags to my AP, it is registered and admin status is Enabled. The radioes had admin Enabled but operational status Down. Even though It is up now so I do not see any SSIDs

 

What may be a reason behind that ?

3 REPLIES 3

Re: WLC 9800 AP not broadcasting SSID

Hi @piotrPaszk 

 

I never work before with 9800, but in old WLC, country code configured on the 9800 and choose and WLAN ID > 16 could be the issue.

 

Espero que la información haya sido útil y si no tienes más preguntas recuerda cerrar el topic, seleccionando la respuesta como "Respuesta correcta"

**Please rate the answer if this information was useful***

**Por favor si la información fue util marca esta respuesta como correcta**

*Tu reconocimiento nos alienta a seguir participando en los foros *

Beginner

Re: WLC 9800 AP not broadcasting SSID

Please check the following:-

  • Verify that Country on WLC code matches with the AP model number.
  • AP is getting required power for radios to operate.
  • 802.11b/g/n and 802.11 a/n/ac are enabled under wireless.
  • Check if AP's in proper AP group which has the required SSID.
  • SSID is in enabled state.
  • SSID is being broadcasted.

Thanks,

Kamaljeet

Highlighted
Participant

Re: WLC 9800 AP not broadcasting SSID

Ensure your AP get sufficient PoE power. For example, if you have a 2800 series model AP, you will need PoE+ or 802.11at

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards