WLC command to support BYOD

[stephendrkw]

WLC 5508

ISE - When using single SSID for BYOD from iPhone versions 12.x and onwards you need to apply config network web-auth captive-bypass enable on all your WLC's in order for the iPhone browser to be supported so supresses. That's a problem for me as Guest users with iPhones are no longer presented a login page.

Does anyone know if config network web-auth captive-bypass enable is supported on a per SSID basis? This would solve my issue!

Someone mentioned to me from WLC 8.4.x this option should be seen in the GUI not sure where or cmd line because @moment this command is a global command meaning all SSID's are enabled once the command is applied.

Thanks.

[stephendrkw]

Found it! yes 8.4x and over support captive-bypass on a per SSID basis

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-4/config-guide/b_cg84/wlan_security.html#d165223e25434a1635

[patoberli]

Great, in that case I suggest you skip 8.4 and directly go to the latest 8.5 version, or maybe even the new 8.8.120.0.