cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

257
Views
0
Helpful
4
Replies

WLC High Availability

I need to failover so we will move all ap's from WLC1 to WLC2. My issue is that exist 2 HA config:

- Global: Wireless> Global Configuration

-Local: Wireless > All APs

What have more priority the local or global?

Thanks,

http://networkingcontrol.wordpress.com/ #CCNP CSCO11962956
4 REPLIES 4
VIP Mentor

Hi Alfredo,Local AP HA tab

Hi Alfredo,

Local AP HA tab has the first priority.

All APs > Details for AP01  and then HA tab.

 

Regards

Don't forget to rate helpful posts

I know that the local config

I know that the local config has override. But how could I do that global config has more priority without outage?

http://networkingcontrol.wordpress.com/ #CCNP CSCO11962956
Cisco Employee

Please refer to the below

Please refer to the below link for the information on Wireless LAN Controller Fail over Priority :

https://supportforums.cisco.com/document/17171/how-configure-wlan-controller-failover-lightweight-access-points

Please let me know If the solution is helpful

Highlighted

Hello Alfredo,Please check

Hello Alfredo,

Please check the below links

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01110101.html

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/69639-wlc-failover.html

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards