On April 10, 2019, a research paper entitled Dragonblood: Analysing
WPA3’s Dragonfly Handshakewas made publicly available. This paper
describes how the Simultaneous Authentication of Equals (SAE) handshake,
defined in IEEE-802.11-2016 and implemented as p...
I've looked around on the Cisco support forums for EEM scripts that can
help me automatically configure switch ports for Cisco Access Points by
utilizing CDP neighbours and found various forums where this is
discussed however I didn't see a complete end t...
2504 Compatibility for HA 2504 failover model is N+1, Meaning a Primary
controller with a backup controller. There is no communication between
the two controllers and they operate as standalone devices, so you have
to configure them separately and license...
The old version of open ssl 0.9.8h referenced on the cert generation doc
doesn't work (if you enter a password in the CSR process).
Ask your Questions on Cisco’s 802.11ac Solutions - Deployment, Design,
and Interop with Cisco Experts: Richard Hamby and Shankar
Ramanathan.Monday, March 30th, 2015 to Friday, April 10th, 2015 Richard
Hamby is a senior technical support engineer and Team ...
Configure 802.11r WLAN using CLI and GUI on Converged Access (5760 WLC
and Catalyst 3850)Karthickeyan Prabanandhan is a Senior Test Engineer
(CCNP,CWNP) in Wireless Engineering Team currently preparing for his
CCIE Wireless lab. In this video series Karth...
IntroductionThis document describes how to install a certificate on a
Cisco Catalyst 3850 Series switch or a Cisco 5760 wireless LAN
controller (WLC), so that the certificate can be used later for
authentication purposes. This is a generic document that f...
There are published materials from many organizations, groups, and
individuals that provide guides on how to protect a network from DDoS
attack. Consolidating all these materials will give a network a fighting
chance against DDoS attack.The sample configu...
Joseph Vasanth Louis is a Software Engineer (CCIE Wireless #40860) in
Wireless Engineering Team. In this video series Joseph will explain "How
to configure 802.1X/EAP using External server, Local radius server and
LDAP" on Converged Access (Cisco 5760 WLC...
Joseph Bradley | July 17, 2013 at 12:49 pm PST | Cisco Blog > Mobility
The explosion in business mobility is transforming our companies in
profound—and sometimes challenging—ways. One of the most vexing issues
is security.Recently, I came across a Wharton...
The Fernbank Museum of Natural History worked with AT&T and Cisco to
bring the museum experience closer to visitors. Supporting both the Data
in Motion and Mobility campaigns, this video overview shows how Fernbank
uses innovative new technologies to desi...
BYOD can wreak havoc on the tenuous relationship between IT and the
business. But networking giant Cisco, which has a sophisticated BYOD
plan for employees, is hoping more reasonable BYOD policies that permit
personal cloud services will help bridge the g...
Viten Patel is is a Wireless Expert working in Cisco TAC. In this Video,
Viten has shown How to do the Flexconnect Vlan Override Local Switching
Clients configuration on Wireless LAN Controller (WLC) and Cisco Secure
Access Control Server (ACS).In the cur...
I have:Product/Model Number : AIR-SAP1602I-E-K9withCisco IOS Software, C1600 Software (AP1G2-K9W7-M), Version 15.3(3)JC, RELEASE SOFTWARE (fc1)I need to have internet access via eth in a deep place of my basement. So I bought a small thing called wifi ext...
Hi together, i am new in this community and hopefully i have a easy question for you experts, but i am working hours on it and can´t figure out what is wrong.I have running a wlc 5500 with 16 AP´s, different VLans for different ISP, everything is running ...
Hello, I'm wondering if when you set multiple mandatory data rates, example 3, that means a client MUST support these 3 data rates or it has to support one among the 3 mandatory data rates ? Example, most of our rf profiles 5Ghz Data Rates are c...
Just wondering if there is a workaround to supporting two factor authentication with the Client VPN. The url here says it doesn't without using a third party tool: https://documentation.meraki.com/zGeneral_Administration/Other_Topics/Two-Factor_Authe...
Hi,Trying to apply Per-User Bandwidth Contract from ISE on a WLAN based on if the client has a valid certificate or not.If I configure Per-User Bandwidth Contract direcly on the hole WLAN in the WLC the clients that connect get restricted BW in both direc...