Greetings! Thank you for the overwhelming response to the First and
Second EFT refresh of 8.10MR6! We are excited to announce the third
refresh of 8.10 MR6 EFT Program for PRODUCTION deployments. While the
CCO release of 8.10MR6 is just a few weeks away, ...
Greetings!Thank you for the overwhelming response and feedback for the
first 17.3.4 EFT/Beta release. Now we are excited to announce the second
refresh of 17.3.4 EFT/Beta Program for PRODUCTION deployments. This
release is the second qualified EFT/Beta Im...
It’s been about two and half years, since the launch of next generation
Cisco Catalyst 9800 Wireless LAN Controllers that has the most
deployment flexibility and runs the modular, scalable, highly reliable,
open and programmable operating system, IOS-XE s...
Hi All, I have made this video for Cisco Pitch the Future Contest in
Malaysia which talks about Wi-Fi 6 and EWC Demo. Please feel free to
view the video below and please support me for this contest by giving
the video a like as the Contest will end on the...
It’s been a long road for our AireOS wireless controllers. In fact these
products have been around Cisco in some form since 2005. As you may have
heard, Cisco made the decision to End-of-Sale (EOS) these products last
month. That means that these AireOS C...
Hello Community, I have an issue where APs do not connect to the WLC.
Connection is made over VPN. Until yesterday all 3 APfailed with below
errors. We change the LAN connection to a cisco router and now one of
the AP magically connected to the WLC. All p...
Cisco Champion Radio · S8|E6: Fastlane+ Optimizes Network and Device
Communication Cisco Fastlane+ is a co-developed solution with Apple that
significantly improves the experience of any Wi-Fi 6 capable iPhone or
iPad connected to a Cisco Catalyst 9130 Ac...
We are pleased to announce the immediate availability of the IOS-XE
release 17.4.1 for the Catalyst Wireless Controllers. The new code is
now posted on the CCO and can be found at this link:
Securing devices without 802.1X PSK (Pre-Shared-Key) WLAN is widely used
for consumer & enterprise IoT onboarding as most of IoT device doesn’t
support 802.1X. While PSK WLAN provides an easy way to onboard IoT, it
also introduces challenges as it doesn’t...
In the past two months, after upgrading two computers to Windows 10,
these computers started losing wireless connectivity. I have firmware
version 220.127.116.11 installed. Computers are Dell Inspiron 5759. They have
the older Intel 8260 adapter and I have the l...
My customer has a 5520 WLC running 18.104.22.168 with currently 160 x 2802i
APs connected in flex connect mode, across multiple sites. Each of the
sites has their APs in their own AP group. There are only three SSIDs
configured on the WLC and these are being...
Hi All, We have 9100 AP trying to join on 9800 WLC. When AP try to join
controller it gives below error Sending Join request to 172.16.31.66
through port 5254 Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in
CAPWAP state: Join(5) Discarding msg CAPWAP_W...
Hello, I hope somebody has a solution for the issue I am facing. I have
2 WAP150's, both with firmware 22.214.171.124, and I am not able to save a
specific change. Under Wireless > Radio > Advanced Settings > Legacy
Rate Sets I can unselect rates that I don't wa...
Hi, I have the following two setups: Setup 1:1 vWLC in US with all AIR-AP2802E-B-K9 model APs1 vWLC in Mexico with a mix of AIR-AP2802E-B-K9 and AIR-AP2802E-A-K9 model APsBoth controllers should be the backup for each other (...
There are many SKUs in 9120 list, like C9120AXI-x, C9120AXE-x and C9120AXP-x which is stated as "Cisco Catalyst 9120AXP Access Point: Indoor, professional installations"What is the difference between C9120AXI-x and C9120AXP-...
Hi Experts, I'm getting multiple alerts from Prime regarding the issues in Access points. below is the log message.''Message: Access point 'XXXXXX' associated with controller 'XXXXX' draws low power from Ethernet. Failure reason: 'The AP draws 15.4 w...
Good morning,in our company building we use an vWLC (126.96.36.199) with several 3602i and 1142 APs (hence the old software).We plan to upgrade our network to C9115 with EWC.Question:Is it possible to use EWC and vWLC in parallel with the same SSIDs (like Mob...
I have Wireless network with AIR-AP1832 APs and CT-3504 controller (OS Ver.: 188.8.131.52). All is working fine except iPhone 12 Pro Max with iOS 14.5.1, which disconnects from network frequently.Can anyone help in this regard? WLC Config is attached